Klein
Armstrong International
View:
Active Filters :
- Brand: Armstrong International Klein
Part #:803346
- #1 Phillips Screwdriver, 3-Inch Round Shank
&bull Precision-machined tip provides accurate fit and torque without slippage&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Cushion-Grip handle for greater torque and comfort&bull Special heat-treated shafts&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:800590
- #2 Phillips Screwdriver 4-Inch Round Shank
&bull Precision machined Phillips tip provides a more consistent geometric symmetry than conventional Phillips screwdrivers to accurately fit and torque without slippage&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:506892
- #3 Phillips Screwdriver 6-Inch Round Shank
&bull Precision-machined tip provides accurate fit and torque without slippage&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:706624
- Inverted Bucket Steam TrapsEnergy efficient because it's so reliable The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure. Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog. Conserves energy even in the presence of wear Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps. In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring. An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply. Corrosion-resistant parts The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel. Venting of air and CO2 The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding. Operation against back pressure The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap. Freedom from dirt problems Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them. Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap.
Qty:
Part #:706681
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:708464
- Steam Trap ConnectorsBesides 2000 Series stainless steel inverted bucket traps, the standard 360° connector or IS-2 connector with integral strainer can also be used on many Armstrong thermostatic, disc, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos two-bolt steam traps can use Armstrong connectors. IS-2 Stainless Steel Connector with Integral Strainer &bull A full line stainless steel strainer in the connector eliminates leak points and reduces installation time &bull A strainer that is not discarded when the trap is replaced &bull Easy strainer screen replacement &bull Optional blowdown valve &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer, bimetallic, and float and thermostatic traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos S-2 connector. Standard 360° Stainless Steel Connector &bull A compact, lightweight assembly &bull Standardization, reducing inventory &bull A compact design, simplifying piping &bull Accommodates Armstrong&rsquos inverted bucket, disc, thermostatic, thermostatic wafer and bimetallic steam traps. Any manufacturer&rsquos 2-bolt steam trap can also be applied to Armstrong&rsquos standard connector.
Qty:
Part #:713360
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713363
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713364
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:713365
Qty:
Part #:713366
-
Y-Type Cast Iron Strainers
250 lb Screwed 1/2"-3" Class 125 Flanged 2"-6" Class 250 Flanged 2"-6"
Screen chambers won't leak or crush
Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Screwed retainers easy in, easy out
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of "freezing in" than with hard-to-break tapered pipe threads.
Off-center blowdown connections for better dirt removal
Off-center drains on 2-1/2" and 3" strainers allow you to remove liquid and dirt nearly completely when blowing down the strainer. Also, less liquid will spill when the screen retainer is removed.
Many screen choices
Many screen materials, meshes and perforations are available.
Qty:
Part #:306243
- Insulated 1/8-Inch Slotted Screwdriver, 4-Inch
Perfect for working in control boxes or other terminal block applications where insulated tools are necessary
1000V Rated for safety
Meets or exceeds IEC 60900 2012, ASTM F1505-10
Durable, two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools
Made in USA with custom US-made tool steel
Cushion-Grip&trade handle for superior torque and comfort
Made in the USA
Protect yourself when working near an energized source. Clearly marked with the official 1000-volt rating symbol, Klein insulated tools exceed IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock. Perfect for working in control boxes or other terminal block applications where insulated tools are necessary.
Qty:
Part #:801370
- Slotted Screw Holding Screwdriver 6-Inch
&bull Start and drive 1/4-Inch slotted screws with one hand&bull Split-blade screw-holding driver wedges into screw slot&bull Positive gripping action holds, starts, and drives slotted screws in awkward, hard-to-reach places&bull Not designed for torquing or tightening&bull Blade thickness of .043-Inch (1 mm) expanding to .085-Inch (2 mm)
Qty:
Part #:500330
- Multi-Bit Screwdriver / Nut Driver, 5-in-1, Phillips, Slotted Bits
Multi-bit Screwdriver / Nut Driver with Cushion-Grip&trade handle for greater torque and comfort
End of handle is marked to quickly identify tool
Features 5/16-Inch (8 mm) nut driver plus #1 and #2 Phillips, 1/4-Inch and 3/16-Inch (7 mm and 5 mm) slotted screwdrivers
The following replacement bits are available
#1 Phillips and 3/16-Inch [5 mm] Slotted (Cat. No. 32478)
#2 Phillips and 9/32-Inch [7 mm] Slotted (Cat. No. 32479)
Qty:
Part #:500296
- Step Drill Bit #1 Single-Fluted
Single-fluted design eliminates skidding and makes for easier resharpening.
Laser-etched hole size are easy-to-read and permanent.
Anti-skid tip eliminates the need for center punching or pilot hole drilling for most sizes.
Drill multiple-size holes in thin sections of metal, plastic and wood using a single bit.
Works in most metals (steel, brass, aluminum, copper) as well as plastic and wood.
Qty:
Part #:500887
- Step Drill Bit #11 Single-Fluted
Single-fluted design eliminates skidding and makes for easier resharpening.
Laser-etched hole size are easy-to-read and permanent.
Anti-skid tip eliminates the need for center punching or pilot hole drilling for most sizes.
Drill multiple-size holes in thin sections of metal, plastic and wood using a single bit.
Works in most metals (steel, brass, aluminum, copper) as well as plastic and wood.
Qty:
Part #:809727
- Leather Tool Pouch with Knife Snap, 5-Pocket
&bull Stitched and riveted leather construction for long life&bull Has a large utility pocket, two pliers pockets and two screwdriver pockets&bull Includes a knife snap&bull Slotted to fit belts up to 2-Inches (51 mm) wide
Qty:
Part #:510675
- Step Drill Bit Double Fluted #3, 1/4 to 3/4-Inch
&bull This product is no longer in production.&bull Single-fluted design eliminates skidding and makes for easier resharpening.&bull Laser-etched hole size are easy-to-read and permanent.&bull Anti-skid tip eliminates the need for center punching or pilot hole drilling for most sizes.&bull Drill multiple-size holes in thin sections of metal, plastic and wood using a single bit.&bull Works in most metals (steel, brass, aluminum, copper) as well as plastic and wood.
Qty:
Part #:306233
- Dual Range Non-Contact Voltage Tester with Flashlight, 12 - 1000V AC
Voltage Tester provides non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Detects voltage with simultaneous visual and audible voltage indicators
Bright flashlight illuminates work area and may be used independent of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP67 Dustproof and waterproof
Conforms to CE requirements
US Patent 10,073,142, D750,985 and other patents pending
The NCVT-3P is a non-contact voltage tester with an integrated flashlight. The voltage sensor detects 12 to 1000V AC and indicates the presence of voltage in cables, cords, circuit breakers, light fixtures, switches, outlets and wires as well as AC voltage in doorbells, thermostats, low voltage lighting and irrigation systems. Includes both visual and audible signals. The NCVT-3P is rugged enough for any job site.
Qty:
Part #:500984
- Diagonal Cutting Pliers, Tapered Nose, 6-Inch
Pliers with tapered nose are designed for working in tight spaces
Short jaws and beveled cutting edges permit close cutting of wire
Induction-hardened cutting knives for long life
Hot-riveted joint ensures smooth action and no handle wobble
Forged in the USA with custom, US-made tool steel
Plastic-dipped handles for comfort and ease of identification
Qty:
Part #:806744
- Diagonal Cutting Pliers, Semi-Flush, 6-Inch
&bull Trims plastic or printed circuit boards&bull Spring-loaded for self-opening action&bull Short jaws and beveled cutting edges permit close cutting of wire&bull Induction-hardened cutting knives for long life&bull Hot-riveted joint ensures smooth action and no handle wobble&bull Plastic-dipped handles for comfort and ease of identification&bull Custom, US-made tool steel
Qty:
Part #:500282
- Wire Stripper/Cutter 10-20 Solid, 12-22 AWG Stranded
Cuts, strips, loops and bends 10-20 AWG solid and 12-22 AWG stranded wire
Shear-type cutting for clean cuts
Serrated nose jaws to bend, shape, or pull wire holes for looping wire ends
Spring-loaded for self-opening action and comfortable, plastic-covered handles
Made in USA
The versatile Klein Tools Multi-Purpose Wire Stripper and Cutter can strip six standard wire sizes without nicking the wire. The scissor action of the cutting jaw makes clean cuts with little effort. Plastic-covered handles are comfortable to use.
Qty:
Part #:802776
- 5/16-Inch Cabinet Tip Screwdriver 1-1/2-Inch
&bull Stubby size allows for precision in tight spaces&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation&bull Precision-machined tip for exact fit&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts for added durability&bull Meets or exceeds applicable ASME / ANSI specifications
Qty:
Part #:508145
- 5/16-Inch Keystone Screwdriver, 6-Inch Square Shank
&bull Heavy-duty square shank for wrench-assisted turning&bull Bolster reinforces shank for hard use&bull Designed for the most demanding uses&bull Cushion-Grip handle for greater torque and comfort&bull Premium chrome-plated for smooth feel and corrosion resistance&bull Internal flanges inside handle provide solid, twist-resistant blade anchor&bull Special heat-treated shafts&bull Precision-machined tip for exact fit&bull Meets or exceeds applicable ASME / ANSI specifications&bull Tip-Ident® quickly identifies the screwdriver type and tip orientation
Qty:
Displaying: 25 - 48 of 2,094 Matching Items